It is the only receiver in the market with Auto Diseq C functionality.
This feature allows for auto recognition and configuration of all satellites connected to the receiver via a Diseq C switch.
TO THE MANUAL METHOD IS THAT WHEN SELECTING CHANNELS TO WATCH FOR THE FIRST TIME IT WILL REQUIRE A FEW EXTRA SECONDS UNTIL THE STATION COMES IN UNSCRAMBLED.. CHANNEL LISTS ARE AVAILABLE FOR DOWNLOAD FROM THE COOLSAT FILES SECTION OF THE FORUM. I SUGGEST THAT YOU LOOK FOR THE LATEST FILE AVAILABLE THAT HAS THE CAID REPAIR FOR THE SATELLITES YOU PLAN ON USING. If your COM port is NOT in device manager and your PC has a DB9 RS232 connector then you must REBOOT your computer, open up your BIOS and ENABLE your com port. The SERVER IP# .201 is already inserted if you are downloading the RQ software using the link above (recommended).
If using a USB to SERIAL ADAPTER and do NOT see "Name of Chipset - USB-to-Serial Com Port (COM#)" the driver for your adapter has not been properly installed on your PC and must be installed or reinstalled or it will not work. If you are using a version of the RQ software downloaded prior to 10/08/12 you will need to verify that this IP# is in the Card_Server_URL line of the file.
If you wish to begin viewing TV in the shortest possible time it is imperative that you carefully follow the instructions in this guide. or if your computer does not have a DB9 RS232 COM port you can use a USB to SERIAL ADAPTER along with your DB9 RS232 straight through SERIAL CABLE.
A USB to SERIAL DRIVER for your OS must also be installed on your PC.
IN FACT MOST DO HAVE SOME CHANNELS MISSING AND THOSE CHANNELS MAY OR MAY NOT BE OF INTEREST TO YOU INDIVIDUALLY. IF THE SERVER IP INFO CHANGES IN THE FUTURE THEN REPLACE THE IP# .201 WITH THE UPDATED INFO. PORT # for the Server included in the email with your access code. YOUR COM PORT If Device Manager verified your PC COM PORT AS COM "1" you may skip this step.
THE MANUAL REPAIR METHOD FOR THE Ca ID MISMATCH WILL ALLOW YOU TO VIEW ALL OF THE AVAILABLE NFPS CHANNELS, ASSUMING THAT YOUR DISH(s) ARE PROPERLY POINTED AND YOU HAVE A GOOD QUALITY SIGNAL FOR EACH OF THE SATELLITES YOU ARE USING, YOUR ANTENNA SETUP IS CORRECT AND YOU HAVE PROPERLY SCANNED IN AND SAVED THE CHANNELS FROM EACH SATELLITE. If you com port number was other than "1" scroll down to the line that says: serial_port=COM1 and change the "1" to # shown in device manager.
THERE IS NO GUARANTEE THAT THESE LISTS CONTAIN ALL THE NFPS CHANNELS AVAILABLE ON THE VARIOUS SATELLITES. The SERVER INFO AS OF 10/07/12 HAS BEEN ENTERED INTO THE CONF FILE AND DOES NOT REQUIRE EDITING.
Cuando ya eres miembro registrado y confirmado de FTAMASTERS tendrs acceso para postear en temas, participar en encuestas, bajar y subir archivos y mucho ms!
Registrarte es rpido, sencillo y totalmente gratis favor de registrarte hoy !
Free-to-air programming is distributed without being encrypted.
The Captive Works receiver has an internal memory that is expandable to 8 GB, a 1 GB flash drive and a Sempron 3000 processor.